Install this Fumoto engine oil valve and you can drain your engine oil without tools and without mess.
The standard F-108 Engine Oil Drain Valve
Install this Fumoto engine oil valve and you can drain your engine oil without tools and without mess.
The Fumoto engine oil valve is an excellent solution to your need to change your own oil without tools and without mess.
The F-108N Engine Oil Drain Valve
with nipple for hose attachment
The Fumoto engine oil valve with a nipple for hose attachment is an excellent solution to your need to change your own oil without tools and without mess.
The Fumoto engine oil valve with a nipple for hose attachment is an excellent solution to your need to change your own oil without tools and without mess.
Engine Oil Drain Valve
with Nipple for Hose Attachment
USING THE OIL DRAIN VALVE WITH A HOSE
FACILITATES EASY OIL CHANGES IN HARD-TO-REACH MODELS
Attention: California Residents
About California Proposition 65
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help california consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
We are providing the following warning for products linked to this page:
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Motor Vehicles
California requires the following notice:
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Additional Information about Proposition 65
For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.
Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.
The standard
F-108 Engine
Oil Drain Valve
Introducing the best way to change oil: the Engine Oil Drain Valve.
Install this valve and you can drain your engine oil without tools and without mess.
Just lift the lever of this solid brass ball valve and give it a quarter turn to open it.
Return the lever to its original position and it locks closed, double sealed to prevent leakage.
The Engine Oil Drain Valve is made of corrosion-resistant forged brass and stainless steel.
The ball valve design provides a straight flow for efficient drainage and a perfect seal when closed.
Frozen drain plug and stripped threads are eliminated forever.
• Drain your engine oil with a touch of a finger
• Replaces drain plug for quick, easy, clean oil change
• No more contact with hot oil and no messy hands or clothes
• Eliminates stripped threads
• Ideal for drawing small sample of oil for oil analysis
Specifications
The size of engine oil drain valve is 16 millimeters - 1.5.
Clean, Convenient
And Safe
Installing a Fumoto Engine Oil Drain Valve makes routine engine oil changes a breeze. Spills, oil soaked garage floors, driveways, and oily hands are a thing of the past when you install a Fumoto Engine Oil Drain Valve.
Safer than a normal oil change: Eliminates the possibility of scalding yourself with hot oil and reduces the time spent under your vehicle in uncomfortable and awkward positions.
Creates an easy and clean way to sample engine oil, even when hot and allows drainage of excess oil in the case of accidental overfilling.
Decreases potential maintenance costs. Eliminates the possibility of frozen drain plugs and stripped oil pans threads.
Ideal for Fleet Maintenance. Fumoto Engine Oil Drain Valves make routine oil changes easier, faster, and cleaner for fleet owners and truck maintenance facilities.
The F-108 & F-108N Engine Oil Drain Valve
– Fits –
| Year | Model | Engine | SKU | SKU-nipple |
|---|---|---|---|---|
| 2024 | Legacy | 2.4L H4 | F-108 | F-108N |
| 2024 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2023 | Legacy | 2.4L H4 | F-108 | F-108N |
| 2023 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2022 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2021 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2020 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2019 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2018 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2017 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2016 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2015 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2014 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2013 | Legacy | 2.5L H4 | F-108 | F-108N |
| 2012 | Legacy | 2.5L H4 SOHC | F-108 | F-108N |
| 2012 | Legacy | 2.5L H4 Turbocharged DOHC | F-108 | F-108N |
| 2011 | Legacy | 2.5L 4 cyl. | F-108 | F-108N |
| 2010 | Legacy | 2.5L 4 cyl. | F-108 | F-108N |
The F-108N Engine
Oil Drain Valve with nipple for hose attachment
The N-type Fumoto Valve can attach a hose to its nipple joint. This can come in handy when dealing with tight spots or inaccessible, hard to reach areas. THIS N-TYPE VALVE IS ABSOLUTELY NOT RECOMMENDED FOR VEHICLES THAT ARE LOW TO THE GROUND such as Subaru models like the BRZ, Impreza, Legacy, and WRX and Toyota models like the Scion FR-S, now branded as the "86," Avalon, C-HR, Camry, Corolla, Prius and Yaris. The standard F-108 valve will work fine on these vehicles, however.
Incorporating Fumoto's most compact ball valve, Fumoto's FN series valves are designed to fit cars, light trucks, vans and select commercial engines. These models are equipped with a nipple which allows a hose to be attached for convenient draining. Constructed of forged brass and stainless steel to exacting Japanese specifications, the FN series valves are designed to provide a lifetime of dependable and reliable service. Used to drain engine oil with the touch of a finger and eliminates stripped threads. Replaces drain plug for quick, easy, clean oil change. Ideal for drawing small sample of oil for oil analysis. Helps avoid contact with hot oil and prevents hands and clothes from getting messed up. The thread sizes on the F108N are 16mm-1.5 and is commonly used on Subaru vehicle engines.
Specifications
The size of engine oil drain valve is 16 millimeters - 1.5.
A Quality Aftermarket Accessory
Manufactured by Fumoto®
*Enjoy Free Ground Shipping on this product
within the Continental US (excluding Alaska and Hawaii)
for a Limited Time during our Happy Driver Sale!
$32.62 with Free Shipping!!
$35.43 with Free Shipping!!
Remove the original drain plug
from your oil pan and drain oil completely.
Insert Fumoto Valve with a gasket
(except for NPT threads).
Use a crescent wrench to install the valve.
*Do not over tighten it.
Make sure Fumoto Valve is closed
before refilling oil.
CLICK THE "HOW TO INSTALL" BUTTON
TO DOWNLOAD INSTALL INFO
Customer testimonials confirm overwhelming satisfaction with the Fumoto F-108 Engine Oil Drain Valve for Toyota models
Customer testimonials confirm overwhelming satisfaction with the Fumoto F-108N Engine Oil Drain Valve for Toyota models
Fumoto Oil Drain Valve F-108N with nipple installed in the vehicle oil pan ready for hose attachment.
Fumoto Oil Drain Valve with nipple installed in the vehicle oil pan with hose attached and oil draining.
Reviews of the standard
F-108 Engine
Oil Drain Valve
Reviewed by Leo Fung
March 19, 2016
Got this for my 2013 Scion FRS. Please note that this valve comes with a blue fiber washer, so use the supplied one and don't add a oem crush washer. The valve had a slow leak initially, until I discovered it was my mistake of only hand tightening the valve. Make sure to first hand tighten, then use a wrench to tighten the valve another 1/8 to 1/4 turn. For me, the valve was pretty tight after 1/8 turn, and now there are no leaks.
Reviewed by shredical1
October 1, 2018
Install and forget it. Oil changes and taking samples for analysis is a breeze! Well worth it
Reviewed by JP800A
September 27, 2016
Awesome product. I would recommend this to any DIY'er out there. Makes oil changing a snap.
Reviewed by James Mazikowski
February 23, 2016
The Fumoto F-108 valve fit perfectly on my Subaru BRZ and makes oil changes a breeze!
Reviewed by Mr. Neckbeard
April 2, 2016
Love it!!!!! Makes oil changes a breeze. Put it on my 2013 Scion FR-S. Brother asked me to order him one and even my co workers.
No more having to buy crush washers or fidgeting around under the car to get a wrench there.
Reviews of the
F-108N Engine
Oil Drain Valve
with Nipple for
Hose Attachment
Reviewed by Manzer Belanger, Jr.
Thursday, September 5, 2024 at 03:12:41 PM EDT
Thank you !
I have just installed it yesterday 9/4/2024 and it was a very simple procedure. (The only thing I did not like was getting old oil on my hands when I removed the old nut from the oil pan that normally happens).
Now that old mess is gone forever - thanks to your product AND THE PRICE WAS RIGHT !!!
Again, Thank You !!
Reviewed by Arie Gilbert
Friday, March 4, 2022, 04:52:30 PM EST
If you're like me and change your own oil, this product solves so many problems its a wonder its not installed at the factory. No crossed thread risk. No oil on your hand. No oil splash. Easy disposal of oil via a tube into an empty container. Time and mess saver. A no brainer.
Reviewed by Brandon Dyches
Wednesday, March 2, 2022, 12:34:51 AM EST
Game changer. I was always afraid to change my own oil, but just finished my first job and will have a valve like this on all my cars in the future. Beautifully made and works perfectly. Thank you.
Reviewed by randyVT
October 10, 2013
I installed this on my new 2014 Subaru Forester and it is great. It does not protrude below the lower body shield and works just as described. With a short length of tubing attached it makes draining the engine oil back into last time's 5 qt oil container for recycling a breeze--it fact, when it's breezy, no oil drops are blown on to the driveway as they were prior to using this when I had a drain pan under the car. No crush washer replacement is required, and cleanup is way simpler. I highly recommend this small addition to make regular maintenance handled quickly and cleanly. Oh and my new Subaru has the oil filter on top of the engine--easily accessible while standing with the hood open. Why didn't design engineers think of this long ago?! If you change your own oil--CHECK THIS OUT. The combination of the filter placement and the addition of this drain valve make regular oil changes easy. And changing the oil regularly ranks right behind no drinking and no txting while driving as the best strategies to make sure you and your car last a long time.
Reviewed by MEATY
July 17, 2017
Installed on a 2015 Subaru XV Crosstrek with perfect results. It stays tucked up out of the way from being hit by anything and the spring-loaded valve lever has to be pressed AND moved in order to open the valve. I installed a tight-fitting valve cap for extra insurance, but I strongly doubt anything can make this valve fail under normal use. Build quality is top notch, and convenience of being able to control the drain flow is priceless. I'm able to drain the oil into quart containers if I wish for easy disposal, or take a sample for an oil analysis easily. This valve pays for itself since I no longer have to purchase the crush washers for each oil change.
Item #F-108 with Lever Locking Clip
now included for added security
ATTENTION CALIFORNIA CUSTOMERS
$32.62
Item #F108N with Lever Locking Clip
now included for added security
$35.43
DOWNLOAD
INSTALLATION
INSTRUCTIONS
Installation for Standard Fumoto Valves
Prepare: Remove the drain plug from your oil pan and drain oil completely. Be sure that the surface of your oil drain port is clean before proceeding with installation.
Assemble: Place the blue fiber gasket (not required for tapered thread or O-ring valves) onto the valve so it will sit flat between the oil pan and the valve once installed.
Hand-Tighten: Begin gently threading the valve into your oil drain port by hand. Once you have ensured that the valve is straight and not cross-threaded, hand-tighten completely.
Torque: Tighten the valve with a crescent wrench on the body of the valve* an additional 1/8 to 1/4 turn. Do not over tighten.
*Do not use a wrench on the hex head if present
**An adapter may be required if the valve cannot be completely tightened due to contact with the oil pan.
Close and lock: Close the valve by firmly turning the control lever clockwise until it stops and is perpendicular to the oil outlet. The lever will click into the recess and lock in position. You should not be able to rotate the lever without first lifting upward.
Clip on and fill up: Install a lever clip if desired around the turret of the valve. If the lever is not seated properly, the lever clip will not fit. Refill the oil to complete your oil change. Always inspect the oil pan for leaks before operating your vehicle.
Operation
To open the valve, remove the lever clip if installed then lift the control lever upward and turn 90° counterclockwise.
To close the valve, turn the control lever firmly clockwise until it stops and is perpendicular to the oil outlet. The lever will click into the recess and lock in position. You should not be able to rotate the lever without first lifting upward. Reinstall the lever clip if desired around the turret of the valve. If the lever is not seated properly, the lever clip will not fit. Always inspect the oil pan for leaks before operating your vehicle.
Just call us at +1.888.Car.Worx (1.888.227.9679) or email us at info@mycarworx.com whenever you need our help!
If there is any reason
why you are not
happy with your purchase, we will accept your returns
for a full refund.*
Customer satisfaction is our top priority.
This is a Secure Site
You can rest assured
that your personal
information is protected from
identity theft on this site.
Fumoto New York offers a LIFETIME LIMITED WARRANTY on this product,
against faulty workmanship and/or material to the original purchaser (with proof of purchase).
For any defective product, Fumoto New York will replace the product at no charge.
This warranty does not cover any damages due to misuse, abuse, negligence or accident.
This warranty is valid only in the United States and Canada.
Note: Photos are sample representations only.
Products may differ due to variations necessary during manufacturing.
© C&C CarWorx Corp. 2007
Email Us!
